All available Software

ARM Diesel Update 8.78 (Version: 8.78)

Date: Aug. 13, 2021

Description:

ARM Diesel - update 8.78
Requires activation

Download Software


ARM Diesel Update 8.72 (Version: 8.72)

Date: April 22, 2021

Description:

ARM Diesel - update 8.72
Requires activation

- Switching modes of operation for multi-instrument configuration

- CR-Tester: Update test plans BOSCH, Denso
- CR-Tester: Adding new types of encoding and targeting Denso: 22, 24 characters

- E3Coder: changes in the display modes of the Daf pressure sensor value (for the new firmware E3Coder)

-CP4-tester: Selection of operating modes for the combined CR test bench.
-CP4-tester: Optimization of control modes and metering of CP4-pumps return flow.

You need to sign in to download this software.


ARM Diesel Update 8.71 (Version: 8.71)

Date: March 16, 2021

Description:

ARM Diesel - update 8.71
Requires activation

- CR-Tester: Update test plans BOSCH, Denso, Delphi, Siemens (list of nozzles in the "Documentation" section

- CP-Tester: Update test plans for pumps BOSCH, Denso, Siemens (activation by serial number is required)

- CR-Tester: Adding new test plans Denso, Siemens from a third-party manufacturer (marked “D” in the type designation in the TTN2 column)

- CR-Tester: Adding new types of encoding BOSCH (cargo), BOSCH Piezo
- CR-Tester: Adding new Denso encoding types.
- CR-Tester: Added the ability to correct the BOSCH signal to ensure compatibility with the account of different hydraulic circuits of the stands (passenger cars 0445110 ***)
- CR-Tester: Added the ability to encode DENSO injectors using custom test plans
- CRip-Tester: Support for 1, 2, 4-channel device modifications.
- CRip-Tester: Advanced mode of injector connection cable calibration.

- Fixed CR-Tester error: it is possible to stop the test if the signal duration is short.

- Changes in the “Connection Hub” settings, support for all types of device connections, installation of USB drivers.
- CR testplan editor: the ability to add new custom BOSCH injectors
- CR testplan editor: the ability to add and modify custom DENSO testplans for encoding.

- UIS-Tester: settings for turning the booster pump on / off, settings for monitoring the protective casing
- UIS-Tester: automatic activation / deactivation of the booster pump during testing
- UIS-Tester: automated procedure for adjusting built-in and custom test plans, creating a new test plan template.
- UIS-Tester: changes in the modes of measuring the encoding timings E1, E3, Daf (for the new modification of E3Coder)
- UIS-Tester: new settings for E1, E3, Daf encoder. Daf pressure sensor calibration.

- UIS test plan editor: improvements in the BOSCH test plan editor (it is impossible to incorrectly specify the type of injector).
- UIS testplan editor: creating and editing test plans Delphi E1, E3, Daf with the ability to encode.

-TachoCounter: oil control functions when changing the CAM-BOX cam, air pressure control
-TachoCounter: settings for the speed controller, changes in the speed table for CR-Jet (depending on the type of motor 4/6 poles), support for new modifications
-CRui-tester: optimization of work in automatic mode.
-CRui-tester: optimization of work for the combined CR + CP-pump stand.
-CP4-tester: optimization of work for the combined CR test bench.
-CP4-tester: optimization of feed pump control, back-up pressure and vacuum, automatic on / off.
-CP4-tester: editing the parameters of the booster pumps in user test plans.
-FlowMetter: changes in device settings.

-CRui-tester, CR-Tester, CRip-Tester, CP4-tester: optimization of work, increasing responsiveness in testplan mode
-Improvement in test plan management: saving results, automatic saving of search in results.
-The function of activating new modifications of devices CR-tester, CRip-Tester, CP4, UIS-Duo.
-Updated the function of changing the logo.

You need to sign in to download this software.


ARM Diesel Update 8.57 (Version: 8.57)

Date: July 20, 2020

Description:

ARM Diesel Update 8.57

Need activation

You need to sign in to download this software.


ARM Diesel Update 8.50 (Version: 8.50)

Date: Feb. 13, 2020

Description:

ARM Diesel Update 8.50

Need activation

You need to sign in to download this software.